RO100 – under-sink reverse osmosis system

Under-sink Osmogasifier

Ultra-compact, direct production reverse osmosis system with external pre-filtration. The system is combined with a tap.

The system is equipped with

anti-flooding
automatic flushing every 12 hours of inactivity
salinity regulating valve to correct the salinity/total hardness if necessary according to the values set by the regulations in force
non-return device to prevent the treated water from flowing back into the water mains
the concentrated water reject is also equipped with a non-return valve to prevent backflow into the membrane.

  • Dispenser: Osmo C106 Family
  • Osmotized water production: 110-120 l/h
  • Membranes (2): 180 GPD TFM1812
  • Dimensions (LxPxH): 105x470x435 mm
Equipped with electronics for adjusting and controlling the following functionalities:
  • Acoustic and visual alarm for filter depletion (pre-alarm at 10% of filter’s remaining autonomy);
  • Acoustic and visual alarm for filter exhaustion;
  • Alarm for possible water supply shortage with automatic shutoff;
  • Flood prevention alarm with automatic system shutoff;
  • Automatic flushing of membranes timed in case of prolonged inactivity;
  • Display showing compliance with the TDS value set by the technician for the produced output water quality.
Other technical features:
  • Maximum humidity: 90%
  • Min temperature: 3° C
  • Max temperature: 40° C
  • Power consumption: 155 watts
  • Still water production: 110-120 l/h at 25°C
  • Pump: 300 l/h volumetric
  • Motor: 150 watts
  • Operating pressure: 10-11 bar
  • Voltage: 230V
  • Frequency: 50 Hz
  • Current draw: 1.5 A
  • Power: 150 W
  • Compatible with filter: Refiner 250 – 350 – 500
  • For use with potable water only

Fill out the form to request information

    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.